 |
| Cantidad: | |
|---|---|
SMLSCO-327
SMLSCO
DN8-DN450
Bolsa tejida o según el cliente.
MANDO/CFR/CIF, etc.
T/T, L/C o como negociación
Tubo sin costura del acero inoxidable de ASTM A312 TP316L/304L con el extremo llano para el tamaño grande
| Material: | Serie 300 | Condición de entrega: | Suave / Duro |
|---|---|---|---|
| END: | Prueba hidráulica o de corrientes parásitas | Corte final: | Extremo liso (PE)/extremo biselado (BE) |
| Tipo: | Sin costura | Inspección: | 100% |
Composición química
| C(máx.) | Si(máx.) | Manganeso(máx.) | P(máx) | S(máx.) | Cr | Ni | Mes | Ti | |
| TP304/1.4301 | 0.080 | 1.00 | 2.00 | 0.045 | 0.030 | 18,0-20,0 | 8,0-10,5 | ||
| TP304L/1.4307 | 0.035 | 1.00 | 2.00 | 0.045 | 0.030 | 18,0-20,0 | 8.0-12.0 | ||
| TP304H/1.4948 | 0,04-0,10 | 1.00 | 2.00 | 0.045 | 0.030 | 18,0-20,0 | 8.0-12.0 | ||
| TP316/1.4401 | 0.080 | 1.00 | 2.00 | 0.045 | 0.030 | 16,0-18,0 | 11.0-14.0 | 2.0-3.0 | |
| TP316L/1.4404 | 0.035 | 1.00 | 2.00 | 0.045 | 0.030 | 16,0-18,0 | 10,0-14,0 | 2.0-3.0 | |
| TP316Ti/1.4571 | 0.080 | 1.00 | 2.00 | 0.045 | 0.030 | 16,0-18,0 | 10,0-14,0 | 2.0-3.0 | 0,7>5x(C+N) |
| TP321/1.4541 | 0.080 | 1.00 | 2.00 | 0.045 | 0.030 | 17,0-19,0 | 9.0-12.0 | 0,7>5x(C+N) | |
| TP317L/1.4449 | 0.080 | 1.00 | 2.00 | 0.045 | 0.030 | 18,0-20,0 | 11.0-14.0 | 3.0-4.0 | |
| TP347H/1.4912 | 0,04-0,10 | 1.00 | 2.00 | 0.045 | 0.030 | 17,0-19,0 | 9.0-13.0 | ||
| TP309S/1.4833 | 0.080 | 1.00 | 2.00 | 0.045 | 0.030 | 22,0-24,0 | 12,0-15,0 | 0.75 | |
| TP310S/1.4845 | 0.080 | 1.00 | 2.00 | 0.045 | 0.030 | 24,0-26,0 | 19.0-22.0 | 0.75 |
Tubo sin costura del acero inoxidable de ASTM A312 TP316L/304L con el extremo llano para el tamaño grande
| Material: | Serie 300 | Condición de entrega: | Suave / Duro |
|---|---|---|---|
| END: | Prueba hidráulica o de corrientes parásitas | Corte final: | Extremo liso (PE)/extremo biselado (BE) |
| Tipo: | Sin costura | Inspección: | 100% |
Composición química
| C(máx.) | Si(máx.) | Manganeso(máx.) | P(máx) | S(máx.) | Cr | Ni | Mes | Ti | |
| TP304/1.4301 | 0.080 | 1.00 | 2.00 | 0.045 | 0.030 | 18,0-20,0 | 8,0-10,5 | ||
| TP304L/1.4307 | 0.035 | 1.00 | 2.00 | 0.045 | 0.030 | 18,0-20,0 | 8.0-12.0 | ||
| TP304H/1.4948 | 0,04-0,10 | 1.00 | 2.00 | 0.045 | 0.030 | 18,0-20,0 | 8.0-12.0 | ||
| TP316/1.4401 | 0.080 | 1.00 | 2.00 | 0.045 | 0.030 | 16,0-18,0 | 11.0-14.0 | 2.0-3.0 | |
| TP316L/1.4404 | 0.035 | 1.00 | 2.00 | 0.045 | 0.030 | 16,0-18,0 | 10,0-14,0 | 2.0-3.0 | |
| TP316Ti/1.4571 | 0.080 | 1.00 | 2.00 | 0.045 | 0.030 | 16,0-18,0 | 10,0-14,0 | 2.0-3.0 | 0,7>5x(C+N) |
| TP321/1.4541 | 0.080 | 1.00 | 2.00 | 0.045 | 0.030 | 17,0-19,0 | 9.0-12.0 | 0,7>5x(C+N) | |
| TP317L/1.4449 | 0.080 | 1.00 | 2.00 | 0.045 | 0.030 | 18,0-20,0 | 11.0-14.0 | 3.0-4.0 | |
| TP347H/1.4912 | 0,04-0,10 | 1.00 | 2.00 | 0.045 | 0.030 | 17,0-19,0 | 9.0-13.0 | ||
| TP309S/1.4833 | 0.080 | 1.00 | 2.00 | 0.045 | 0.030 | 22,0-24,0 | 12,0-15,0 | 0.75 | |
| TP310S/1.4845 | 0.080 | 1.00 | 2.00 | 0.045 | 0.030 | 24,0-26,0 | 19.0-22.0 | 0.75 |
